KMCAD - Home
KMCAD - Company
KMCAD - Product
KMCAD - Service
KMCAD - Contact
Antifoam
Product   >> Lubricants Additives   >> Antifoam
Kianco Antifoam Additives Product
KMCAD-T901    
  Antifoam Agent - KMCAD-T901  
 

Description:
KMCAD-901 is colorless transparent thick liquid, odorless, non-toxic and non-highly-volatile, prepared from silicon powder and chloromethane, with high flash point, and has high antifoaming effect, but defective in oil solubility, which will put influence to air discharging.

Applications:
KMCAD-901 is primarily used in internal combustion engine oil, gear oil, hydraulic oil and as defoamer. It also can be applied for demoulding, waterproof, anti-mold and insulation in the rubber, plastics and casting industry. It is colorless transparent thick liquid.

Dosage:
The recommended dosage is 5.0-20.0 mg/kg.

Characteristics:

ITEM

INDICE

TEST METHOD

Density (25°C), kg/m3

965

GB/T1884

Flash Point (open cup), °C

≥303

GB/T267

Viscosity (25°C), mm2/s

102%

GB/T265

Solidifying Point, °C

≤-52

GB/T510

Refractive Index (25°C)

1.405

-

Viscosity-temperature Coefficient

0.60

-

TAN, mg KOH/g

≤0.02

GB/T264

Loss of Weight in Vacuum-heat, %

0.4

-

Dielectric Constant

≥2.7

GB/T5654

Packing:
It is packed in 25 liter metal drum.

Storage:
Store in dry, clean and ventilating warehouses.

 
KMCAD-T903    
  High Reactive Antifoam Agent for Lubricant  KMCAD-T903  
 

Description:
KMCAD-T903 is milk white to light yellow liquid.
Excellent performance of oil anti-foam, oil soluble and stability. Overcome the shortcomings of silicon-oil anti-foam agent, such as bad stability, low solubility, high blending technology requirements, high air-release value and the possibility of losing anti-foam ability when the existance of some aditives. Prolong the service life of lubricating oils. Easy to use, Low cost, Reliable quality.

Applications:
KMCAD-T903 is used primarily for various lubricating oils.

Dosage:
The recommended dosage is 3.0mg/kg to 5.0 mg/kg.

Characteristics:

ITEM

INDICE

TEST METHOD

Density (20°C), kg/m3

750

GB/T1884

Flash Point (open cup), °C

≥31

GB/T267

Impurities, m%

≤0.01

GB/T511

Defoaming Property (in 500SN), ml/ml, 24°C

24/0

GB/T12579

Packing:
It is packed in 25 liter metal drum. Store in dry.

Storage:
Store in dry, clean and ventilating warehouses.

 
KMCAD-T922    
   Non-Silicone Antifoam Agent KMCAD-T922  
 

Description:
KMCAD-922 is a transparent liquid, Favorable oil solubility. Excellent defoaming ability especially to the oil products that contain synthetic sulfonate or other high foaming substances. Easy to use. No need of dilution.

Applications:
KMCAD-922 is primarily used for the oil products that have high requirement for defoaming properties and no requirement for air release, especially all diesel engine oils. It is transparent liquid.

Dosage:
The recommended dosage is 0.01-0.1%.

Characteristics:

ITEM

INDICE

TEST METHOD

Density (20°C), kg/m3

750

GB/T1884

Flash Point (open cup), °C

≥31

GB/T267

Impurities, m%

≤0.01

GB/T511

Defoaming Property (in 500SN), ml/ml, 24°C

24/0

GB/T12579

Packing:
It is packed in 20 liter metal drum.

Storage:
Store in dry, clean and ventilating warehouses.

 
Home Account Careers Investors Legal Media MSDS Privacy Site Map Terms Contact  
English     
Copyright 2007 Kianco Additives