Description:
KMCAD-T701 Petroleum Barium Sulfonate corrosion inhibitor lubricant additive. It is brown viscous liquid or semi-solid. Good oil solubility when heated, Excellent anti-rust and anti-corrosive ability to ferrous and non-ferrous metals, Good anti-humidity, anti-salt spray, anti-brine and water replacement performance.

Applications:
KMCAD-T701 is primarily used in antirust oils such as replacement-type anti-rust oil, inter-process rust oil, seal oil, anti-rust lubricating oil and anti-corrosion grease etc., as the antirust agent.

Dosage:
The recommended dosage is 3.0%~15.0%.

Characteristics:

ITEM	INDICE	TEST METHOD
Barium Sulfonate, m%,	≥46	Appendix A
Volatiles, m%	5.1	Appendix B
Barium, m%	≥7.1	SH/T0225
Watert, m%	≤0.2	GB/T260
Impurities, m%	≤0.1	SH/T511
PH Value	7.5	PH Test Strips

Packing and storage:
The product is packed in 25 liter metal drum.

Packing and storage:
Please refer to SH/T0164, for transportation, storage and oil blending. Keep the temperature not higher than 60°C. For long-term storage the suggested temperature is lower than 50°C. The dry, clean  and ventilating warehouse is recommended.

Description:
KMCAD-T702 Petroleum natrium sulfonate Corrosion inhibitor lubricant additive. It is reddish brown sticky liquid.  Strong hydrophilicity, Inhibit metal from corrosion, Good antirust and emulsification ability.

Applications:
KMCAD-T702 is primarily used in blending cutting emulsified oil and anti-rust oil.   The product can serve as antirust and emulsifying agent for cutting fluid and antirust oil and grease.

Dosage:
The recommended dosage is 3.0%~15.0%.

Characteristics:

ITEM	INDICE	TEST METHOD
Sodium Sulfonate, m%	45	Appendix A
Inorganic Salt, m%	≤0.34	Appendix B
Mineral Oil, %	49	Appendix C
Water, m%	≤2.0	GB/T260
PH Value	7.5	PH Value Strips

Packing:
The product is packed in 200 liter metal drum (net weight: 190 kg/drum).

Storage:
Please refer to SH/T0164, for transportation, storage and oil blending. Keep the temperature not higher than 60°C. For long-term storage the suggested temperature is lower than 50°C. Strictly prevent water and impurities from entering. The dry, clean.

Description:
KMCAD-T703 is reddish brown oily liquid, has excellent acid neutralization and oil solubility, it can form a protective coating on the metal surface to prevent black metals such as copper, aluminum and such alloys, various claddings from rustiness, it also has hydrotropy to other antirusts.

Applications:
KMCAD-T703 antirust agent, It is used to modulate various kinds of rust prevention- lubricating oil, antirust grease.

Dosage:
The recommended dosage is 1.5%.

Characteristics:

ITEM	INDICE	TEST METHOD
Appearance	Oily in liquid	Eye measurement
Oil solubility	Transparent	Eye measurement
Basic nitrogen content        %	0.8-2.0	SH/T0413
Mechanical impurity         %	≤0.20	GB/T511
Damp heat test	Determination	GB/T2361
Total acid number     mgKOH/g	30-80	GB/T7304
Water soluble acid or alkali	Neutral or alkalescence	GB/T259

Packing:
The product is packed in 25 kg/drum.

Storage:
Please refer to SH/T0164, for transportation, storage and oil blending. Keep the temperature not higher than 60°C. For long-term storage the suggested temperature is lower than 50°C. Strictly prevent water and impurities from entering. The dry, clean and ventilating warehouse is recommended.

Description:
KMCAD-T705A Neutral barium dinonylnaphthalene sulfonate Corrosion inhibitor lubricant additive. It is brown or dark brown transparent viscous liquid. Excellent anti-corrosive, lubricity, demulsifying and abrasion resistance performance, Good oil solubility and acid neutralization capacity, Good antirust ability, especially to black metal, Produce no precipitation in blending additive packages.

Applications:
KMCAD-T705A is excellent antirust, acid neutralizer and anti-corrosion agent. It is widely used in various of petroleum, oils and greases, such as petroleum ether detergent, extreme pressure lubricants, antirust oils, engine oils and the industial lubricating oils running in water environment.

Dosage:
The recommended dosage is 1.0-5.0%.

Characteristics:

ITEM	INDICE	TEST METHOD
Flash point (open cup), °C	≥166	GB/T267
TBN, mg KOH/g	45	GB/T7304
Barium, m%	10.6	GB/T0225
Water, m%	≤0.09	GB/T260
Impurities, m%	≤0.09	SH/T511
Kinematic Viscosity (100°C), mm2/s	≤99	GB/T265
Density (20°C), kg/m3	≤999	GB/T1884

Packing:
The product is packed in 200 liter metal drum (net weight: 200 kg/drum.

Storage:
Please refer to SH/T0164, for transportation, storage and oil blending. Keep the temperature not higher than 60°C. For long-term storage the suggested temperature is lower than 50°C. Strictly prevent water and impurities from entering. The dry, clean and ventilating warehouse is recommended.

Description:
KMCAD-T706 is a white to light yellow acicular crystal, slightly soluble in water, and soluble in organic solvent such as alcohol, benzene, toluene, chloroform, dimethyl acylamide, etc., prepared from o-phenylene diamine and sodium nitrite. It provides the lubricant with good antirust to copper and copper alloys; preferable antirust effect on silver and silver alloy; and possesses favorable corrosion inhibition performance.

Applications:
KMCAD-T706 is used primarily in antirust oil and grease. It also serves as gas phase corrosion inhibitor for copper and copper alloy; silver and silver alloy circulation water treatment agent, etc. 

Dosage:
The recommended dosage is 0.05% to 0.5%.

Characteristics:

ITEM	INDICE			TEST METHOD
Chroma, no. max	120	160	180	GB/T605
Final Melting Point, °C min	96	95	94	GB617
Solubility in Alcohol	Clean	Clean	Clean	-
PH Value	5.3~6.3	5.3~6.3	5.3~6.3	GB/T9724
Water, m% max	0.15	0.15	0.15	A*
Ash, m% max	0.10	0.15	0.20	GB/T 508
Purity, m% min	98	98	98	-
Dampheat Test d(H62 brass sheet) min	7.0	5.0	3.0	GB/T2361

Packing:
The product is packed in 20 kg/bag.

Storage:
The packing, marking, transportation, storage and delivery acceptance should meet the requirements of HG3-119. It is packed in 20 kg/bag. Store in dry, clean and ventilating warehouses.

Description:
KMCAD-T746 Dodecylene succinic acid corrosion inhibitor/ lubricant additive additive is brown transparent thick liquid. Provide the lubricant with good anti-rust ability and oil solubility.

Applications:
KMCAD-T746 is primarily used in blending steam turbine oil, machine tool oil, hydraulic oil, hydraulic transmission oil, fuel oil and antirust grease.

Dosage:
The recommended dosage is 0.02 -0.8%.

Characteristics:

ITEM	INDICE	TEST METHOD
Cu-Strip Corrosion (100°C, 3h), rating	≤1b	GB/T5096
Flash point (open cup), °C	≥92	GB/T3536
Iodine Value, g/100g	65	GB/T0298
TAN, mg KOH/g	280	GB/T7304
PH Value	≥4.3	PH Value Strips

Packing:
The product is packed in 25 liter metal drum.

Storage:
Please refer to SH/T0164, for transportation, storage and oil blending. Keep the temperature not higher than 60°C. For long-term storage the suggested temperature is lower than 50°C. The dry, clean  and ventilating warehouse is recommended.