Description:
KMCAD-T1001 is a dark brownish red liquid, prepared from Amine and Epoxide. This product shows excellent degradability and water extraction. It puts effects on both fresh lubricating oil and degraded one. The combination of kmcad-T1001 and kmcad-T746 (dodecylene succinic acid) show synergistic demulsification.

Applications:
KMCAD-T1001 is used primarily in gear oil, steam turbine oil, anti-wear hydraulic oil, compressor oil and other lubricating oils which likely contact with water in service.

Dosage:
The recommended dosage is 0.05% to 0.3%.

Characteristics:

ITEM	INDICE	TEST METHOD
Flash Point (open cup), °C	≥111	GB/T3536
Kinematics Viscosity (100%), mm2/s	18	GB/T265
Nitrogen, m%	0.55	SH/T0224
Water, m%	≤0.22	GB/T260
Impurities, m%	≤0.04	GB/T511

Packing:
The product is packed in metal drum (net weight: 25 kg/drum.

Storage:
Please refer to SH/T0164, for transportation, storage and oil blending. Keep the temperature not higher than 60°C. For long-term storage the suggested temperature is lower than 50°C. The dry, clean  and ventilating warehouse is recommended.

Description:
KMCAD-T1201 N,N'-disalicylidene, propyldiamine, Metal passivator, engine oil additive, gear oil additive, oil additive. Good oil solubility, Compounded with kmcad-T501, it can improve the anti-oxidation performance and reduces the dosage of kmcad-T501. Reduce the activity of metal ions and inhibit the oil products from being catalyt. Increase the stability of fuels. Prolong the storage duration of oil products. Reduce the formation of glial.

Applications:
KMCAD-T1201 can be used in gasoline, jet fuel and lubricating oil as the metal deactivator. It is brownish red transparent liquid ( the pure product is crystal ).

Dosage:
The recommended dosage is 3.0-10.0mg/kg.

Characteristics:

ITEM	INDICE	TEST METHOD
Refractivity (n25D)	≤1.57	GB/T6488
Density (20°C), kg/m3	1051	GB/T1884

Packing:
The product is packed in 25 liter metal drum.

Storage:
Please refer to SH/T0164, for transportation, storage and oil blending. This product is flammable. Store in shady and cool place. If the crystal is separated out, melt by heating under a temperature of 50°C. It is toxic, if careless to contact with skin, rinse and wash with water and soap immediately. And avoid inhaling vapor of this product.