|
Kianco
Detergent Additives Product |
|
|
|
|
KMCAD-T104 |
|
|
|
Low Base Synthetic Calcium Sulfonate KMCAD-T104 |
|
|
Description:
KMCAD-T104 is a brownish-red liquid, prepared from the high boiling
fraction synthetic phenylsulfonic acid. It provides the lubricant with good
detergency, fine antirust performance and high-temperature stability.
Applications:
KMCAD-T104 is used primarily for blending with high quality lubricating oil
for internal combustion engine, especially to give a low-ash engine oil.
Dosage:
The recommended dosage
is
0.5% to 3.0%.
Characteristics:
Item |
Typical Value |
Test Method |
Density (20°C), kg/m3 |
Report |
GB/T 1884 |
Oil
Soluble Spot Test |
Clean |
QJ/JSH
704 |
Flash point (open cup), °C |
180
min |
GB/T 267 |
Kinematic Viscosity (100°C), mm2/s |
150
min |
GB/T 265 |
TBN,
mg KOH/g |
20~30 |
QJ/JSH
735 |
Calcium, m% |
2.0
min |
QJ/JSH
738 |
Sulfur, m% |
2.0
min |
SH/T
388 |
Packing:
It is packed in 200 liter metal drum.
Storage:
Store in dry, clean and ventilating warehouses. |
|
KMCAD-T105 |
|
|
|
Medium Base Synthetic Calcium
Sulfonate
KMCAD-T105 |
|
|
Description:
KMCAD-T105 is a brownish-red liquid, prepared from the high boiling
fraction of synthetic phenylsulfonic acid. It provides the lubricant with
good detergency, fine High-temperature stability, favorable acid
neutralizing ability, and antirust performance.
Applications:
KMCAD-T105 is used primarily with high quality engine oil. The dosage is from.
Dosage:
The recommended dosage
is
0.5% to 3.0%.
Characteristics:
Item |
Typical Value |
Test Method |
Density (20°C), kg/m3 |
1010~1040 |
GB/T 2540 |
Oil Soluble Spot Test |
Clean |
QJ/JSH 704 |
Flash Point (open cup), °C |
180 min |
GB/T 267 |
Kinematics Viscosity (100°C), mm2/s |
30 max |
GB/T 265 |
TBN, mg KOH/g |
145~165 |
QJ/JSH 735 |
Calcium, m% |
6.65 min |
SH/T 0270 |
Sulfur, m% |
1.80-2.20 |
SH/T 388 |
Packing:
It is packed in 200 liter metal drum.
Storage:
Store in dry, clean and ventilating warehouses. |
|
KMCAD-T106 |
|
|
|
Hight Based Synthetic Calcium Sulfonate
KMCAD-T106 |
|
|
Description:
KMCAD-T106 is a brownish-red liquid, prepared from high boiling fraction
synthetic phenylsulfonic acid. It provides the lubricant with good
high-temperature detergency, acid neutralizing ability, and antirust
performance.
Applications:
KMCAD-T106 is used primarily with high quality engine oils and marine oil,
especially for engines, which use fuel with high sulfur content. Better
compatibility could be obtained by adding in ashless dispersant,
anti-oxidant and corrosion inhibitor.
Dosage:
The recommended dosage
is
0.5% to 3.0%.
Characteristics:
Item |
Typical Value |
Test Method |
Density (20°C), kg/m3 |
1100~1140 |
GB/T 2540 |
Oil Soluble Spot Test |
Clean |
QJ/JSH 704 |
Flash Point (open cup), °C |
180 min |
GB/T 267 |
Kinematics Viscosity (100°C), mm2/s |
200 max |
GB/T 265 |
TBN, mg KOH/g |
295 min |
QJ/JSH 735 |
Calcium, m% |
11.6 min |
QJ/JSH 738 |
Sulfur, m% |
1.20-1.55 |
SH/T 388 |
Packing:
It is packed in 200 liter metal drum.
Storage:
Store in dry, clean and ventilating ware houses. |
|
KMCAD-T107 |
|
|
|
Over Based Synthetic Magnesium
Sulfonate KMCAD-T107 |
|
|
Description:
KMCAD-T107 is a brownish-red liquid, prepared from high boiling fraction
synthetic phenylsulfonic acid. It provides the lubricant with excellent acid
neutralizing ability, fine detergency and antirust performance.
Applications:
KMCAD-T107 can be used with high quality engine oils with
low ash content.
Dosage:
The recommended dosage
is
0.5% to 3.0%.
Characteristics:
Item |
Typical Value |
Test Method |
Density (20°C) , kg/m3 |
1000-1100 |
GB/T 1884 |
Flash Point (open cup), °C |
180 min |
GB/T 267 |
Kinematics Viscosity (100°C), mm2/s |
150 max |
GB/T 265 |
TBN, mg KOH/g |
390 min |
SH/T 0251 |
Mg, m% |
8.5 min |
SH/T 0270 |
Water, m% |
0.10 max |
GB/T 260 |
Impurities, m% |
0.10 max |
GB/T511 |
Turbidity, JTU |
100 max |
SH/T 0028 |
Packing:
It is packed in 200 liter metal drum.
Storage:
Store in dry, clean and ventilating warehouses. |
|
KMCAD-T109 |
|
|
|
Calcium Alkyl Salicylate
KMCAD-T109 |
|
|
Description:
KMCAD-T109 is a deep brown transparent liquid, prepared from alkylphenol.
It provides the lubricant with excellent high-temperature detergency, good
acid neutralizing ability, better anti-oxidation ability, high temperature
stability and water resistance.
Applications:
KMCAD-T109 It can be used for blending with various grades of engine oils and
marine oils.
Dosage:
The recommended dosage
is
2.0% to 4.0%.
Characteristics:
Item |
Typical Value |
Test Method |
Density (20°C), kg/m3 |
900~1100 |
GB/T 2540 |
Flash Point (open up), °C, |
165 min |
GB/T 3536 |
Kinematics Viscosity (100°C), mm2/s |
10~40 |
GB/T 265 |
TBN, mg KOH/g |
150 min |
SH/T 0251 |
Calcium, m% |
5.5 min |
SH/T 0270 |
Water, m% |
0.1 max |
GB/T 260 |
Turbidity, JTU |
Report |
SH/T 0028 |
Packing:
It is packed in 200 liter metal drum.
Storage:
Store in dry, clean and ventilating warehouses. |
|
KMCAD-T115-B |
|
|
|
Sulfurized Calcium Alkylphenate KMCAD-T115 B |
|
|
Description:
KMCAD-T115B is a deep red liquid. It provides the lubricant with excellent
high temperature detergency, fine acid neutralizing ability, better
anti-oxidation ability and antirust performance, and water resistance as
well. It is prepared from Dodecylphenol.
Applications:
KMCAD-T115B is used primarily for blending with high quality internal
combustion engine oils and marine cylinder oils, among which, T115A is used
primarily for blending gasoline engine oil requiring high detergency.
Dosage:
The recommended dosage
is
0.5% to 4.0%.
Characteristics:
Item |
Typical Value |
Test Method |
Density (20°C), Kg/m3 |
Report |
GB/T 1884 |
Flash Point (open cup), °C |
170 min |
GB/T 3536 |
Kinematics Viscosity (100°C), mm2/s |
Report |
GB/T 265 |
TBN, mg KOH/g |
250 min |
SH/T 0251 |
Calcium, m% |
8.9 min |
SH/T 0297 |
Sulfur, m% |
2.9~3.8 |
SH/T 0303 |
Water, m% |
0.3 max |
GB/T 260 |
Packing:
It is packed in 200 litre metal drum.
Storage:
Store in dry, clean and ventilating warehouses. |
|
|
|
|
|
|
|
|