|
|
Kianco
Lab Filters Product |
|
|
|
|
|
|
|
 |
|
Model: |
KMMFR-LAB-003 |
|
|
|
Specification: |
For the special
design , Kianco Filter Φ50 plate filter has the good
character of large flux and high safety. The
membrane use the polypropylene mesh reinforced
technique, and the pressure resistance can be 350kpa.
Nearly 20 cm 2 filtration area make it reach a high
flux under a low pressure difference. Trapezoid
tubing can easily accept ID 7-13mm tubing. At mean
time, it has 6:100 luer connection, which is very
easy to be used.
Other membrane materials for the filter units such
as PES, N66, CN-CA, PVDF etc is also available in
Kianco Filters
upon request. |
|
Parameters： |
|
Material |
PTFE，PP reinforced mesh and PP housing |
|
Bio-safety |
Meet the requirements of USP Class VI Biological Test for
plastics |
|
B.P（alcohol） |
0.2µm：> 0.9bar |
|
0.45µm：> 0.6bar |
|
Connection |
Inlet: Stepped Hose Barb with female Luer slip interior |
|
Outlet: Stepped Hose Barb with female Luer slip interior |
|
Filtration area |
19.6cm2 |
|
Air flow rate |
0.2µm： |
|
p=0.5bar ：15L/min |
|
p=1bar：27L/min |
|
p=1.5bar：37L/min |
|
0.45µm: |
|
p=0. 5bar：20L/min |
|
p=1.0bar：32L/min |
|
p=1.5bar：43L/min |
|
p is the admission pressure |
|
Housing Diameter |
About 65mm（PTFE Membrane） |
|
About 59mm（Other Membrane） |
|
Work condition |
Maximum operating pressure：350kPa；Maximum heat resistance：60℃ |
|
Sterilization |
autoclave(121℃/134℃) or EO sterilization
|
|
|
|
|
Ordering Information: |
 |
|
|
|
|
|
|
|
|
|
|
|
