|
01.Tower body
structural features: type reasonable line, steady air flow,
excellent material, colorful surface gel coat resin contains
anti-UV agents, anti-aging, high strength, light weight,
corrosion resistance. Under the tower body by ordering
requirements, can be equipped with overflow, sewage, water
supply automatically by here direct suction, eliminating the
need for a cooling pond, above equipped with noise canceling
muffler pad to reduce dripping sound.
02. Filler: modified PVC wave plate, transverse ribs, the
ability of the redistribution of water resistance, good
thermal performance, high temperature 70 degrees, the low
temperature of -50 degrees, the flame redundancy is good.
03. Rotating water distributor and water distributor:
equipped with a stainless steel ball bearings, flexible and
reliable operation, low head water distribution uniformity,
the use of aluminum alloy or glass steel into the water
distributor tube installed on the water board received to
overcome a floating water phenomenon.
04. Fan: series cooling tower design of low noise parameters
by the Department of Engineering Mechanics, Tsinghua
University, high efficiency fan, aluminum alloy plates
airfoil or fiberglass blades low noise, high efficiency.
05. Motor: by Tsinghua University on the basis of the Y-type
series installation size, low noise energy-saving motors for
cooling tower design, sealed waterproof performance , high
temperature, high efficiency, and low noise.
06. Deceleration device: polyester fiber reinforced neoprene
power belt drive, high-temperature, high efficiency, water
does not stretch to overcome the slippage The noise is very
small.
07. Sound absorption facilities: ultra-low noise cooling
tower increased outside air intake with sound-absorbing
material shielding, equipped with suction and two in the
upper and lower sound gate, in order to achieve the maximum
effect of the noise reduction. Body out on the tower outlet
installed bell shielded with sound-absorbing material and
sound absorption gate, reducing the noise coming out of the
fan and motor.
08. Into windscreens: equipped with fiberglass louver to
reduce the floating water, the air flow resistance is small,
especially for the northern region and throughout the year
need to use cooling towers units.
09. Bracket: all fans, packing into windscreens, tower body,
etc. steel bracket assembly, galvanized or painted
anti-corrosion. The fasteners are galvanized or stainless
steel bolts. |
