KMEPW - Home
KMEPW - Company
KMEPW - Product
KMEPW - Service
KMEPW - Contact
UPS
Product   >> UPS   >> Standby   >> KSLP
Kianco Power Standby UPS Product
HF Line Interactive Pure Sine Wave UPS KSLP series
Features:
●Technology line interactive with AVR
●Design of high frequency
●High/Low Voltage Protection
●Overload/Short Protection
●UPS Start up without battery
●Cool start (0 to 100% load)
●Spike & Surge Suppression
●Automatic recharge even UPS is off
●Audible Beeping Alarm 
●LED display
●Frequency Selection Automatically
●Intelligent Battery Management
●USB, RS232,Dry Contact, SNMP/WEB (optional), communication with software
●Compatibility with generators
●Battery Replacement Hot
●2 in 1 dual format tower and rack 
●Protective fax / modem with 2 RJ11 /RJ45(Option), EPO (optional) 
●Scalable autonomy in using kits
Specifications:

Product

Requirements

Model 1

Model 2

Model 3

Model 4

Model 5

Power (VA)

KSLP-750VA

KSLP-1000VA

KSLP-1500VA

KSLP-2000VA

KSLP-3000VA

Input 

Voltage 

 220/230/240VAC ±20%(176-288±4V)

Frequency        

 60/50Hz +/-10% 

Output  

Voltage (AVR)

 220/230/240VAC±10% Boost:114% of Vin,   Bulk:88 % of Vin

Voltage (Inverter Mode) 

 220/230/240VAC ± 5% (+5% ,-10% after Low Battery Warning)

Capacity

750VA/500W

1000VA/700W

1500VA/1050W

2000VA/1340W

3000VA/2100W

Frequency (Inverter Mode) 

 60/50Hz ±+/- 0.1 Hz

Load Power Factor

0.7

DC Component 

10sec average < 0.1% of rms value of output voltage  

Transfer Time  

2-4MS typical,6MS max

Break out for 6-msec.max. 
Generator mode for 10 msec. max

Waveform

Sine wave 

Communication Interface

 

USB, RS232, Dry Contact, SNMP (optional)

Protection

Spike & Surge Suppression

yes

High/Low Voltage Protection

Switch to Bat. O / P when Mains over regulation range

Over load /short Circuit

Fuse & current limited for both Mains and Battery modes

Function

Cool start

Cool start computer even there is no main power

 EPO function

Short circuit the EPO, the UPS will shut down output immediately in both line mode or battery mode.

LED's display

 UPS on, battery level, general failure, AVR

Automatic recharge

Automatic recharge even UPS is off

Battery

Type    

Lead-Acid maintenance-free

Dc Bus

24V

24V

48v

96V

Number

7AH*2PCS

9AH*2PCS

9AH*4PCS

4.5AH*8PCS

Charge current

 

 

3A typical

Recharge time

Internal battery modules will recharge <3 hours to 90% usable capacity nominal line after full load discharge.

Back up time (at 100% PFC or SPS load )

>5mins

>5mins

>5mins

>5mins

>5mins

Physical

Weight (KGs)

8.6

9.6

6.5+12

6.5+12

31.5

Product Dimensions (mm)

235*56.2*383

217*86.5*413*2UDS

483*86.2*582

Efficiency

AC-AC

>95 % for normal mode, 92% for boost and buck mode

DC-AC

>85% 

Acoustic

Noise level

 < 55dBA

Environmental

Altitude

0-1500 meters

Storage Temperature

0 to 25°C   (recommended for batteries).

Operating Temperature   

 0-40 Degree C 

Humidity        

20% to 80%

Power Outlets

No. and types

IEC320, 4pcs

IEC320, 6pcs

IEC320, 8pcs

Home Account Careers Investors Legal Media MSDS Privacy Site Map Terms Contact  
English     
Copyright 2007 Kianco Power Systems