2 Mil Aluminum Foil
Acrylic
Adhesive - Removable Paper Liner - Total Thickness 3.5 Mil -
UL Listed (kmctp-510)
Description
A 2 Mil (50 micron) high strength aluminum foil coated
with an aggressive, high temperature acrylic adhesive system.
The foil conforms well to both fibrous and sheet metal ducts,
providing an excellent vapor seal. The malleable foil also
conforms well around corners and to irregular surfaces.
Coated with a special cold weather acrylic pressure
sensitive adhesive system which combines superior quick stick
at normal temperatures with superior low temperature
performance below freezing – this is the ultimate in cold
weather tapes. Recommended for use at normal and elevated
temperatures also.
Application
Primarily used for vapor sealing fiberglass duct board and
sheet metal ducts, can also be used on FSK system.
Features
-
Improved vapor sealing of fiberglass duct board, sheet
metal ducts & FSK systems.
-
High tack cold weather acrylic adhesive combines
superior quick stick at normal temperatures with superior
low temperature performance at freezing.
-
Superior high temperature and high humidity
performance.
-
Temperature resistance: - 35 F to 260 F. Minimum
application temperature: - 25 F.
-
Adhesion: 96 oz/in width. Tensile Strength: 27 lbs/in
width.
-
Comparable:
Ideal 488, Compac 317,
Compac 808,
Shurtape AF-973, Nashua
322, Fasson
810,
Polyken 337
Product Numbers | Sizes | Case Quantities
Product Code |
Size |
Units Case |
Packaging |
KMCTP-51002 |
2" x 50 yd |
24 / case |
bulk |
KMCTP-510025 |
2 ½" x 50 yd |
20 / case |
bulk |
KMCTP-51003 |
3" x 50 yd |
16 / case |
bulk |
KMCTP-51004 |
4" x 50 yd |
12 / case |
bulk |
Physical characteristics shown are averages from tests
recommended by our own procedures. A particular roll may vary
slightly from these averages. The buyer should determine the
suitability for their own use |